TEL: +49 335 23386578 

Gyroscope Navigation
Robot Vacuum Cleaner Q7000

Zigzag-planned Type Robot Vacuum Cleaner

Buy now

Get to know the cleaning effect of Q7000

Walking on your feet freely

The floor cleaned by Q7000 is so clean without bacteria and dust
so that you could walk on your feet at ease.


 

The charm of Q7000

Zigzag Cleaning

Intelligent zigzag cleaning path, planned and regularly, improve the cleaning coverage.

User Friendly Design
Easy Operation

Voice prompt and touch screen operations. Just press CLEAN to start cleaning.

Small Body, Big Water Tank

Dry Sweeping, Wet Mopping
The water in the water tank can slowly wet the mop to do the mopping, thus improve the cleaning efficiency.
The design of water infection hole is accurate so that the water will creep evenly to the mop.

Five Cleaning Modes

Auto Cleaning: Q7000 can adjust its cleaning routine automatically based on different floor types.
Spot Cleaning: Q7000 will spend more time in dirty areas.
Edge Cleaning: Q7000 will clean the edge and corner of the walls.
Zigzag Cleaning: A planned and regular cleaning mode.
Schedule Cleaning: You can schedule the cleaner to start cleaning at scheduled time.

The Dustbin Capacity is 300ml and washable

The large size of dustbin enable the robot to clean a big area at one time so that you don't have to clean it frequently. Also the dustbin is washable to keep healthy and clean.
Filtering the Dust
The application of air purification standard to filter all the particles, making the air nice and clean.

2000mAH Li-ion Battery

2000mAH Li-ion Battery lasts long and makes low energy consumption. One-time cleaning can cover an area of 150-200㎡ in 100mins.

Gyroscope Navigation
Intelligent Cleaning Path

Thanks to the gyroscope navigation, Q7000 can detect the house environment and adjust its cleaning path regularly.


 

The cleaning effect

 

Low Noise

The noise is about 50DB without disturbing your life.

Intelligent Suction Adjustment

Q7000 will adjust its suction power according to different floor types. It will clean the floor more effectively and also save more battery power.

Anti-fall sensors

The infrared sensors under the bottom will automatically detect the height drop so that the robot will not fall and get damaged.

Auto Recharge

Q7000 can find its way back to the charging station at low battery to get recharged without manual help.

Climb across barriers without manual help

The robot can climb across a slope of angle up to 15 degree and threshold of height up to 10mm.

UV Sterilization

The UV light will kill the bacteria on the floor and carpet, keeping the house clean and healthy.


 
Daily maintenance so easy

Clean the Roller Brush

A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place

Clean Sensors and Charging Poles

Clean the sensors and charging poles per week or according to daily use  to make sure the robot is well maintained. 
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base.
Clean vacuum intake and dust sensors as shown in the pictures.

Clean dustbin

Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.

Clean and Replace Filters

Clean filters with cleaning brush tool.
Note: Clean dustbin module when the trash icon flashes on the display panel.
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
2. Do not place HEPA and primary filters directly in the sun.
Close dustbin cover and install it into main unit.
Note: Dustbin and Filters( including HEPA and filter) could be replaced if needed.

How to handle the water tank trailing bar

1.Open the water injection hole, after water injected, stick the mop to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the cleaner.



Parameter Overview

Choose one robot best for you



Q7000
$229
Buy now

A338
$219
Buy now

A335
$209
Buy now

B2005Plus
$199
Buy now

B3000PLUS
$209
Buy now

X5S
$239
Buy now

B6009
$259
Buy now
 
  Diameter 34cm          
  Height 9cm          
  Weight 3kg          
  Battery 2000 mAh Li-Ion          
  Dustbin Capacity 300ml          
  Power 25W          
  Charging Time 270-300 mins          
  Cleaning Time About 90 mins          
  Noise 50DB          
  Side Brush Double          
  Water Tank 180ml          
  Cleaning with central brush -----          
  Intelligent Dust Detection Yes          
  UV Function Yes          
  Obstacle Avoidance Yes          
  Anti-drop Sensors Yes          
  Voice Prompt Yes          
  Auto Recharge Yes          
  Remote Control Yes          
  Cleaning Modes Auto/Spot/Edge/Zigzag/Schedule          
  Map Navigation -----          
  Wifi Control -----          
               
WebPAGE COPYRIGHT 2017 LIECTROUX ROBOTICS INC. All Rights Reserved.