TEL: +49 335 23386578 

Wifi APP Control And
2D Map Navigation

Buy now

Kennenlernen der Reinigungswirkung von Q8000

High Cleaning Coverage,
Not Missing Any Part


 
The Charm of Q8000

Smart and Latest Functions of Robot Vacuum Cleaner

Q8000 has the all the basic and the latest functions. It is as smart as human beings.

Make up the Missing Part, Clean the whole House Thoroughly

As the robot memories where has been cleaned and where has no. It will make up the missing area and the edge of the wall then no any part is missing and the whole house is cleaned thoroughly.

Wifi APP Control Easy to Use

It's easy to use with Wifi App control. Just finger's clicks, the robot vacuum will do all cleaning modes, schedule cleaning, mopping and recharging.

No Random Wandering
Save more energy

Intelligent zigzag regular cleaning path, say goodbye to the old random cleaning, less energy consumption.

Partition Scheme
High Cleaning Coverage

Q8000 will learn the whole house environment and make partition cleaning scheme. Thus the cleaning coverage is high with low repetition rate. And not missing any part.

Bionic Algorithm
Improving Cleaning Efficiency

Advanced gyroscope navigation and mapping system building ensure the accuracy of the map.

Ultra high speed environment perception to
detect the whole environment


 

The Cleaning Effect

 

Virtual Blocker

The virtual blocker will stop the robot vacuum entering to the areas you do not want it to go so that you don't have to watch it over.

Powerful Mode/ Low Noise

The suction power is adjustable. The powerful mode has strong suction power. The less powerful mode has low noise, it is as quiet as not to disturb your work or rest.

Big Battery Lasting Long

2000mAh Lithium Battery can lasts for 100 minutes and is enough to handle a big house of 250㎡ at a full charge.

Calculate the Shortcut Path to Recharge

The coordinate memory algorithm enables the robot vacuum to detect the environment and find the shortcut to recharge at low battery. If the charging station is not nearby, it will return to the original point after finish cleaning at enough power, not afraid to get lost.

Anti-collision

Infrared sensors will protect the robot vacuum from running into furniture and turn around in time before collision so that it will protect itself and the furniture.

Anti-falling

The anti-falling sensors at the bottom can detect fall over 8cm to avoid falling down stairs.

Wet and Dry Mopping

Under Auto mode, the robot vacuum can do mopping as well. Under mopping mode, it will not vacuum and the fan and side brushes will stop working.

Climb across barriers without manual help

Liectroux Q8000 can climb across a slope of angle up to 15 degree and threshold of height up to 10mm.


 
Daily maintenance so easy

Clean the Roller Brush

A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place

Clean Sensors and Charging Poles

Clean the sensors and charging poles per week or according to daily use to make sure the robot is well maintained.
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base.
Clean vacuum intake and dust sensors as shown in the pictures.

Clean dustbin

Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.

Clean and Replace Filters

Clean filters with cleaning brush tool.
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
2. Do not place HEPA and primary filters directly in the sun. Close dustbin cover and install it into main unit
Note: Dustbin and Filters( including HEPA and filter) could be replaced if needed

How to handle the water tank trailing bar

1.Open the water injection hole, after water injected, stick the mop to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the cleaner.



Übersicht der Kennwerte

Wählen Sie einen Roboter, der für Sie am besten geeignet ist



Q8000
$269
Buy now

Q7000
$229
Buy now

A338
$219
Buy now

A335
$209
Buy now

B2005Plus
$199
Buy now

B3000PLUS
$209
Buy now

X5S
$239
Buy now

B6009
$259
Buy now
 
 

Durchmesser

34cm

         
 

Höhe

9cm

         
 

Gewicht

3kg

         
 

Akku

2000 mAh Li-Ion

         
 

Kapazität Staubbehälter

300ml

         
 

Leistung

25W

         
 

Ladezeit

270-300 min

         
 

Reinigungsdauer

About 90 min

         
 

Geräuschentwicklung

50dB

         
 

Seitenbürste

Double

         
 

Wassertank

180ml

         
 

Reinigung mit mittiger Bürste

-----

         
 

Intelligente Stauberkennung

Yes

         
 

UV-Funktion

Yes

         
 

Hindernisvermeidung

Yes

         
 

Anti-Sturz-Sensoren

Yes

         
 

Sprachansage

Yes

         
 

Automatisches Wiederaufladen

Yes

         
 

Fernbedienung

Yes

         
 

Reinigungsmodi

Auto/Spot/Edge/Schedule

         
 

Kartennavigation

Yes

         
 

WiFi-Steuerung

Yes

         
               
WebPAGE COPYRIGHT 2017 LIECTROUX ROBOTICS INC. All Rights Reserved.