Quickly roll hair and dust into the dustbin by the main brush and

rubber brush

The charm of A335

Sweeping

Easily catches the dust on the corner of the objects.

Vacuuming

Mopping

Easily mops the floor by mopping plate under the bottom

When certain time is scheduled, the robot will leave the charging
station to work at scheduled time.

Schedule Cleaning

The cleaning effect

Climb across the obstacles

Extremely low noise

Smart Isolation

The working noise is 45DB without disturbing the living life.

Dual-way Virtual Blocker makes sure the robot works within certain area.

Extra-thin body

Only 8.7cm in height, it can easily work under the bed and sofa.

The robot can easily cross the threshold or carpet strip less than 15mm in height.

The application of UV Light will disinfect the bacteria on the carpet and floor, making home clean and healthy.

Anti-falling sensors

The anti-falling sensors protect the robot from falling from the stairs or table.

Anti-collision Sensors

The robot will avoid collision when it runs into furniture or other barriers as it has anti-collision sensors.

Automatic Recharge

UV Light Sterilization

The robot will search the docking station for recharging automatically in case of low battery during cleaning.

Use your thumb to press the dustbin button on the top of the robot, and the other four fingers on the bottom of the robot,

then draw out the dustbin backwards. Pour out the dust.

(Please note the fan assembly should not be washed. Please refer to the User's Manual on fan assembly. )

Daily maintenance so easy

How to match the remote control with the robot vacuum cleaner?

First press "ENTER" button on the remote control for a few seconds and turn on the switch on the right side of the robot. If you could

hear "Beep" twice, then the matching is done. The remote control

could be used then. If you couldn't hear "Beep" twice, repeat above steps.

Take off the dustbin

Break out the fastener on the right side of the dustbin thus open

the HEPA Filter bracket. Press the bracket with one hand making the fastener off the HEPA Filter and take out the HEPA Filter with the other hand, then replace the new HEPA Filter. (Please refer to User's Manual for details.)

Install Virtual Blocker

Open the cover at the bottom of the virtual blocker, and install the

battery as the picture. The negative side is close to the knob and

the other is the positive side.

Replace HEPA Filter

Install the mopping pad vertically with the two card holes matching the two card slots on the bottom of the robot, then put the mopping pad horizontally. (Please refer to User's Manual for details.)

HEPA Filter Cleaning

Take off the HEPA Filters as the above described, then use the

cleaning brush to wipe out the rubbish and dust. (As the left picture)

Mop Installation

Parameter Overview

Choose one robot best for you

A335

$209

A338

$219

B2005Plus

$199

B3000PLUS

$209

Q8000

$269

Q7000

$229

B6009

$259

X5S

$239

Diameter

Height

Weight

Battery

Dustbin Capacity
 

Power

Charging Time

Cleaning Time

Noise

Side Brush

Water Tank

Cleaning with central brush

Intelligent Dust Detection

UV Function

Obstacle Avoidance

Anti-drop Sensors

Voice Prompt

Auto Recharge

Remote Control

Cleaning Modes

Map Navigation

Wifi Control
 

32cm

8.7cm

3.2kg

2200mAH Ni-MH

300ml

25W

4-5 hours

90-120 mins

45DB

Single

-----

-----

-----

-----

-----

-----

Yes

Yes

Yes

Yes

Yes

Auto/Spot/Edge/Schedule

Buy now

Buy now

Buy now

Buy now

Buy now

Buy now

Buy now

Buy now