German
Chinese
Italian
Russia
French
Vietnamese
Ukrainian
Page Copyright © 2018 LIECTROUX ROBOTICS GmbH. All Rights Reserved.
Address: Birnbaumsmühle 65, 15234 Frankfurt/Oder, Germany 闽ICP备17003317号-1
Q8000
Wifi APP Control And
2D Map Navigation
Getting to know the cleaning effect of Q8000
High Cleaning Coverage,
Not Missing Any Part
The charm of Q8000
Smart and Latest Functions of Robot Vacuum Cleaner
Q8000 has the all the basic and the latest functions. It is as smart as human beings.
Make up the Missing Part, Clean the whole House Thoroughly
Intelligent zigzag regular cleaning path, say goodbye to the old
random cleaning, less energy consumption.
It's easy to use with Wifi App control. Just finger's clicks, the robot vacuum will do all cleaning modes, schedule cleaning, mopping
and recharging.
Wifi APP Control Easy to Use
Bionic Algorithm Improving Cleaning Efficiency
Advanced gyroscope navigation and mapping system building
ensure the accuracy of the map.
Partition Scheme
High Cleaning Coverage
Q8000 will learn the whole house environment and make partition cleaning scheme. Thus the cleaning coverage is high with low
repetition rate. And not missing any part.
Bionic Algorithm
Improving Cleaning Efficiency
Ultra high speed environment perception to
detect the whole environment
The Cleaning Effect
Calculate the Shortcut Path to Recharge
Virtual Blocker
The virtual blocker will stop the robot vacuum entering to the areas you do not want it to go so that you don't have to watch it over.
Powerful Mode/ Low Noise
The suction power is adjustable. The powerful mode has strong suction power. The less powerful mode has low
noise, it is as quiet as not to disturb your work or rest.
Big Battery Lasting Long
2000mAh Lithium Battery can lasts for 100 minutes and
is enough to handle a big house of 250㎡ at a full charge.
The coordinate memory algorithm enables the robot
vacuum to detect the environment and find the shortcut to
recharge at low battery. If the charging station is not nearby,
it will return to the original point after finish cleaning at
enough power, not afraid to get lost.
Under Auto mode, the robot vacuum can do mopping as well. Under mopping mode, it will not vacuum and the fan and side brushes will stop working.
Anti-falling
Anti-collision
Infrared sensors will protect the robot vacuum from running
into furniture and turn around in time before collision so that it will protect itself and the furniture.
The anti-falling sensors at the bottom can detect fall over 8cm to avoid falling down stairs.
Climb across barriers without manual help
Wet and Dry Mopping
Liectroux Q8000 can climb across a slope of angle up to 15 degree and threshold of height up to 10mm.
Clean the sensors and charging poles per week or according to
daily use to make sure the robot is well maintained.
Wipe the sensor window and auto charging sensors with a soft dry
cloth.
Clean charging contacts on self charging base.
Clean vacuum intake and dust sensors as shown in the pictures.
Daily maintenance so easy
Clean the Roller Brush
A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place
Clean Sensors and Charging Poles
Clean filters with cleaning brush tool.
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
2. Do not place HEPA and primary filters directly in the sun. Close
dustbin cover and install it into main unit
Note: Dustbin and Filters( including HEPA and filter) could be
replaced if needed
Clean dustbin
Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.
Clean and Replace Filters
How to handle the water tank trailing bar
1.Open the water injection hole, after water injected, stick the mop
to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the
cleaner.
Parameter Overview
Choose one robot best for you
Q8000
$269
Q7000
$229
A338
$219
A335
$209
B2005Plus
$199
B3000PLUS
$209
B6009
$259
X5S
$239
Diameter
Height
Weight
Battery
Dustbin Capacity
Power
Charging Time
Cleaning Time
Noise
Side Brush
Water Tank
Cleaning with central brush
Intelligent Dust Detection
UV Function
Obstacle Avoidance
Anti-drop Sensors
Voice Prompt
Auto Recharge
Remote Control
Cleaning Modes
Map Navigation
Wifi Control
34cm
9cm
3kg
2000mAH Li-Ion
300ml
25W
270-300 mins
About 90 mins
50DB
Double
180ml
Yes
Yes
Yes
Yes
Yes
-----
Yes
Yes
Yes
Yes
Auto/Spot/Edge/Schedule