TEL: +49 335 23386578 


Combine with vacuuming and mopping two functions.

Buy now

Get to know the cleaning effect of B3000Plus

Dry and Wet Moppingn
Making cleaning easier

Strong vacuuming function in the forepart and wet and dry mopping at the back part.
300ml of water tank and four water outlets make the creeping slow and balanced,
wiping off any stubborn stains, keeping the floor clean.

The charm of B3000Plus

Please hand over to me

Acute Responsen, Play to the score.

Intelligent Frequency Conversion Motor

Frequency conversion motor always plays to the score.
It can detect the volume of the dirt and adjust the suction power.
Thus greatly improve the vacuuming effect.

UV Sterilization

The bacteria on the floor and carpet are here and there. UV sterilization keep the home healthy.

Suction Power with 1200pa

Not letting go any dust.


The cleaning effect


2000MAH Battery, Strong Power

B3000Plus can easily clean up large-sized apartment with 150-200 square meters.


The robot will find the charging base to recharge at low battery.

The height of the robot is 9cm

B3000Plus which height is 9cm, can pass through sofa, tables and beds.

Schedule Cleaning

Once set up, you could arrange your time freely and hand over the cleaning job to B3000Plus.

Low noise

50DB noise will not disturb you when you are at work and at rest.

Multiple Cleaning

Unique design to separate the dust and rubbish, avoiding the block of the dust collector. Prime filter and HEPA filter can filter micro dust, eradicating second-pollution.

Daily maintenance so easy

Clean the Roller Brush

A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place

Clean Sensors and Charging Poles

Clean the sensors and charging poles per week or according to daily use  to make sure the robot is well maintained. 
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base.
Clean vacuum intake and dust sensors as shown in the pictures.

Clean dustbin

Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.

Clean and Replace Filters

Clean filters with cleaning brush tool. 
Note: Clean dustbin module when the trash icon flashes on the display panel.
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
   2. Do not place HEPA and primary filters directly in the sun.
Close dustbin cover and install it into main unit.
Note: Dustbin and Filters( including HEPA and filter) could be replaced if needed.

How to handle the water tank trailing bar

1.Open the water injection hole, after water injected, stick the mop to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the cleaner.

Parameter Overview

Choose one robot best for you

Buy now

Buy now

Buy now

Buy now

Jetzt kaufen

Buy now

Buy now

Buy now
  Diameter 34cm          
  Height 9cm          
  Weight 3kg          
  Battery 2200mAH Ni-MH          
  Dustbin Capacity 300ml          
  Power 24W          
  Charging Time 3-4 hours          
  Cleaning Time About 90 min          
  Noise 50DB          
  Side Brush Double          
  Water Tank 300 ml          
  Cleaning with central brush -----          
  Intelligent Dust Detection Yes          
  UV Function -----          
  Obstacle Avoidance Yes          
  Anti-drop Sensors Yes          
  Voice Prompt Yes          
  Auto Recharge Yes          
  Remote Control Yes          
  Cleaning Modes Auto/Spot/Edge/Schedule          
  Map Navigation -----          
  Wifi Control -----